Current position > Product detail
『Orbit Flow Meter: Sourcing Rotary Piston and Turbine Volumetric Valves』Related information(flow rotameter|digital flow meter|balo meter|hydraulic flow meter|volumetric meter|positive displacement meter|pitot tube flow meter|displacement meter|cfm meter|variable area flow meter|inline flow meter|differential pressure flow meter|calibrated flow meter|velocity meter|paddle wheel flow meter|oval gear flow meter|anemometer hvac|multiphase flow meter|doppler flow meter|thorpe tube flowmeter|heat flow meter)
Orbit Flow Meter Sourcing: Rotary Piston and Turbine Volumetric Valves
Quick Answer: Rotary piston meters handle thick fluids and low flow rates. Turbine meters handle clean low viscosity lines and high turndown. Orbit flow meter is often used as a generic name for positive displacement devices but the term can create spec confusion. Send your pipe size, flow range, viscosity, pressure, and temperature to Silver Automation Instruments for a direct quote.
Many buyers search for orbit flow meter and then ask for rotary piston and turbine volumetric valves in the same email. We see this combination often from distributors and end users in Southeast Asia, the Middle East, and Latin America. The application usually involves batch dosing or fuel oil measurement. Sometimes the fluid is palm oil. Sometimes it is a solvent. Sometimes it is a resin.
Why Rotary Piston and Turbine Volumetric Valves Appear Together
A rotary piston flow meter is a positive displacement meter. The rotating piston traps a fixed volume of fluid and transfers it from inlet to outlet. This works well for viscous fluids. A turbine meter uses a rotor in the flow stream. The rotor speed tracks velocity. That works well for thin clean fluids and higher flow rates.
The confusion starts with the term volumetric valve. Some spec sheets use volumetric valve to describe a flow meter with an output for a control valve. Or they mean a valve that doses volume. On sites in Vietnam and Indonesia we have seen the phrase volumetric valve on tender documents for diesel and palm oil. That document lists a turbine meter for one line and a rotary piston meter for another line.
Rotary Piston Flow Meter Specs That Matter
Buyers often ask for a rotary piston meter when the viscosity exceeds 100 cP. Typical ranges we quote are DN15 to DN50. Flow range can be 0.5 to 1800 liters per hour depending on meter size. For a paint manufacturer in Vietnam we supplied an oval gear flow meter, which uses the same positive displacement principle. The meter measured resin at 85 °C and 400 cP. Pulse output went to a local batch controller.
Silver Automation Instruments supplies oval gear flow meters and can support rotary piston positive displacement applications. Materials include 316L stainless steel, aluminum, PTFE, and PEEK. Accuracy can reach plus or minus 0.5 percent of reading. Pressure rating is often 40 bar but higher ratings are available on request.
Turbine Meter Specs for Low Viscosity and High Flow
For water, diesel, condensate, and light chemicals a turbine meter is usually cheaper and easier to install. Sizes go from DN15 to DN200. Flow range starts around 0.3 meters per second and can reach 10 meters per second. Accuracy is around plus or minus 1 percent of reading. A 4-20 mA HART output or pulse signal can connect to a PLC or flow computer.
A seawater desalination plant in Oman used a turbine meter on the permeate line. The fluid was clean water at 30 °C. Line size was DN80. The flow range was 8 to 80 cubic meters per hour. We supplied a 316L stainless steel turbine flow meter with a pulse output and a local display.
Orbit Flow Meter Name and Spec Confusion
Orbit flow meter is not a single technology. In many tenders it appears as a generic device name. A buyer in Mexico asked us for an orbit flow meter for fuel oil. The actual application needed a positive displacement meter with high temperature clearance. Another customer in Saudi Arabia used orbit flow meter to mean a turbine mete
Because the name is loose, we ask for the physical property data before quoting. This avoids sending the wrong technology. It also prevents a situation where a distributor buys a turbine meter for a viscous product and then returns it. We have seen this on customer sites many times.
What to Send a Supplier Before You Quote
A good quote needs five data points. First, the fluid name and viscosity in cP at operating temperature. Second, the flow range in kilograms per hour or liters per hour. Third, the operating pressure in bar. Fourth, the operating temperature in degrees Celsius. Fifth, the pipe size in DN and the connection type.
Do not send only the word orbit flow meter. Send the five data points. In practice, this reduces quote turnaround from three days to one day. For hazardous areas, tell us if the meter needs ATEX Zone 1 or Zone 2 approval. We can match the correct flow meter from our oval gear or turbine ranges.
Regional Notes for Southeast Asia, Middle East and Latin America
In Southeast Asia, we see many positive displacement applications for palm oil, diesel, and resin. Buyers in Vietnam, Indonesia, and Thailand often need local calibration in liters and pulse output for PLC integration. In the Middle East, desalination and oil transfer projects favor turbine meters for clean water and light fuel. In Latin America, food and beverage plants often measure syrups and oils with positive displacement meters.
Our main customers are industrial end users and distributors with 10 to 100 staff. They want a reliable meter that arrives with a calibration certificate and a readable display. Air freight to these regions takes 5 to 8 days. Sea freight is cheaper for large orders.
FAQ: Five Questions Engineers Ask Before Buying
What is the difference between a rotary piston meter and a turbine meter?
A rotary piston meter uses a physical chamber and moving piston to trap fixed volumes. It works for thick fluids and low flow. A turbine meter has a rotor that spins with flow velocity. It suits thin and clean fluids.
Can a turbine meter handle viscous oil?
Not well. High viscosity dampens the rotor. This reduces accuracy and repeatability. For oils above 100 cP we recommend a positive displacement meter like an oval gear or rotary piston type.
What output signals can Silver Instruments provide?
The standard options are pulse output, 4-20 mA, and 4-20 mA HART. We can add a local display. For batch dosing a pulse output is common. For continuous flow a 4-20 mA HART output is easier for the control room.
Do you supply ATEX approved meters for diesel or solvent lines?
Yes. ATEX Zone 1 and Zone 2 versions are available for both oval gear and turbine meters. Provide the gas group and temperature class if the site has a specific certificate. We supply the certificate on request.
What is the lead time for a DN40 oval gear flow meter?
A standard DN40 oval gear flow meter with pulse output can ship in 3 to 5 working days. Custom materials or ATEX approval can add 5 to 10 working days. Large orders may ship by sea to reduce freight cost.
Send us your pressure (bar), temperature (°C), pipe size (DN), and flow range. Also include the fluid viscosity in cP. Contact Silver Automation Instruments by Tel: +86-135-1213-1526, Whatsapp: 86-135-12131526, or WeChat: +86 13512131526. We will reply with a recommended model and a quote for your specific application.