Current position > News detail
『Flow Meter Parts Name Reference: Technical Terminology for Component Identification』Related information(flow rotameter|digital flow meter|balo meter|hydraulic flow meter|volumetric meter|positive displacement meter|pitot tube flow meter|displacement meter|cfm meter|variable area flow meter|inline flow meter|differential pressure flow meter|calibrated flow meter|velocity meter|paddle wheel flow meter|oval gear flow meter|anemometer hvac|multiphase flow meter|doppler flow meter|thorpe tube flowmeter|heat flow meter)
Flow Meter Parts Name Reference: Technical Terminology for Component Identification
Quick Answer: Flow meter component names fall into four groups: sensor, transmitter, process connection, and wetted material. Correct part terminology helps buyers get faster quotes and helps maintenance teams order the right spares. Use this flow meter parts name reference to identify parts for six flow meter technologies used in process industries.
Silver Automation Instruments supplies industrial flow meters and spare parts to customers in Southeast Asia, Oceania, Latin America, Africa, and the Middle East. We have seen many RFQs fail because a part name was translated or written in local shorthand. Here is the thing. Even a small word change can mean the wrong liner material or a sensor that does not fit the pipe.
Why Component Identification Matters for Field Maintenance
Engineers often ask for a flow meter spare part by using model codes or drawing numbers. That is fine for OEM supplies, but many plants buy from multiple suppliers. A clear generic part name reduces mismatch risk. For example, a customer in Vietnam ordered a magnetic flow meter liner replacement for a DN100 unit with PTFE liner and 316L electrodes. Because the part names were clear, the quote was ready in one working day.
In practice, most engineers skip the full parts breakdown until a meter fails. That is normal. But a spare parts list with correct names avoids long downtime in water and wastewater plants or chemical dosing systems.
Magnetic Flow Meter Parts Names
A magnetic flow meter has a flow tube, liner, electrodes, excitation coils, and a transmitter. The liner is the wetted surface inside the tube. Common liner materials are PTFE, PFA, EPDM, and hard rubber. The electrodes contact the process fluid and send the voltage signal. Electrode materials include 316L stainless steel, Hastelloy C, titanium, tantalum, and platinum. The transmitter converts the electrode signal into a 4-20 mA HART output and displays flow rate.
When you request a magnetic flow meter spare part, state the meter size in DN, liner material, electrode material, and process connection. For example, a DN80 magnetic flow meter for seawater service may need a PTFE liner, titanium electrodes, and PN16 flanges. This level of detail prevents quote delays.
Coriolis Flow Meter Parts Names
A Coriolis mass flow meter contains flow tubes, a drive coil, pickoff sensors, a transmitter, and a manifold. The flow tubes vibrate at a controlled frequency. The drive coil supplies the vibration. Pickoff sensors measure the phase shift between the inlet and outlet sides. The transmitter computes mass flow, density, and temperature from the sensor signals.
For spare parts, customers often ask for a sensor tube assembly or a transmitter replacement. We recommend mentioning the tube material such as 316L stainless steel, Hastelloy, or alloy C22. Also state the process connection size and pressure rating. A customer in Indonesia recently needed a Coriolis sensor tube for a 25 mm line measuring palm oil density. The correct part name and material code made the quote accurate.
Ultrasonic Flow Meter Parts Names
Ultrasonic flow meters use transducers, a mounting rail or spool piece, signal cables, and a flow computer. Clamp-on ultrasonic meters have transducers that attach to the outside of the pipe. Inline ultrasonic meters have transducers mounted on a spool piece. The flow computer calculates flow by measuring transit time difference or Doppler shift.
Common spare parts for ultrasonic meters include transducer sets, coupling gel, signal cables, and display modules. When you ask for a transducer, give the pipe outer diameter, pipe material, and fluid temperature. A water utility in Peru ordered clamp-on transducers for a DN200 carbon steel pipe. Because the outer diameter and fluid temperature were included, Silver Automation Instruments supplied the correct frequency and wedge angle.
Vortex Flow Meter Parts Names
A vortex flow meter has a shedder bar, a piezoelectric sensor, a transmitter, and a body with flanges. The shedder bar create
For spare parts, the most common request is a vortex sensor probe or a transmitter board. We ask for the meter size, fluid type, temperature, and whether the meter is used in an ATEX Zone 1 area. A chemical plant in Saudi Arabia needed a replacement piezoelectric sensor for a steam line at 180 °C. The part name and temperature rating allowed our team to match the sensor type.
Oval Gear Flow Meter Parts Names
Oval gear flow meters use two oval gears, bearings, shafts, a measuring chamber, and a register or pulse output. The gears rotate as fluid passes through the chamber. Each rotation equals a known volume. Bearings and shafts are common wear parts, especially with diesel, fuel oils, and solvents.
When requesting oval gear meter spares, mention the gear material such as cast iron, stainless steel, or aluminum. Also state the viscosity in cP and flow rate in L/min or L/h. A paint manufacturer in Southeast Asia needed new gears for a diesel oval gear meter. The fluid type and viscosity range were enough for us to confirm the part fit.
Thermal Mass Flow Meter Parts Names
Thermal mass flow meters have a probe, RTD sensors, a transmitter, and insertion hardware. Some units include a ball valve retractor for hot tap installation. The RTD sensors, often PT100 or PT1000, measure heat transfer caused by gas flow. The transmitter converts the signal to mass flow in kg/h or Nm3/h.
Common spare parts include probe assemblies, RTD sensor pairs, and display boards. For a probe replacement, state the gas type, pipe inner diameter, pressure in bar, and temperature in °C. A biogas plant in Thailand ordered an RTD sensor pair for a thermal mass flow meter on a 100 mm gas line. The gas composition and pipe size helped us provide the right probe length.
How to Prepare a Spare Parts RFQ
Send us these details with every parts inquiry: meter type, meter size in DN, fluid name, pressure in bar, temperature in °C, flow range, pipe material, and wetted material if known. If you have a nameplate photo or model code, include that too. In practice, a photo of the tag reduces errors more than any written description.
Most engineers skip the nameplate photo. Do not skip it. A photo shows the sensor type, serial number, flange rating, and sometimes the liner or electrode code. This helps our team at Silver Automation Instruments match the part faster.
Frequently Asked Questions About Flow Meter Components
What is the difference between a sensor and a transmitter in a flow meter?
The sensor is the part in contact with the process fluid or the part that creates the flow signal. The transmitter reads that signal and gives an output such as 4-20 mA HART or pulse.
Which magnetic flow meter parts are wetted?
The liner and the electrodes are wetted. The flow tube body may also be wetted if the liner fails. Grounding rings can be wetted depending on the installation.
Can I replace a flow meter transmitter without replacing the sensor?
Yes, in many cases. For magnetic, Coriolis, ultrasonic, vortex, and thermal mass meters, the transmitter can be replaced if the sensor is not damaged. You must match the transmitter model and calibration data.
What information do I need to order replacement gears for an oval gear flow meter?
You need the gear material, meter size, fluid type, viscosity in cP, and flow range. A nameplate photo also helps.
Do you supply spare parts for flow meters made by other brands?
Yes. Silver Automation Instruments supplies compatible parts for many industrial flow meter brands. Send us the nameplate photo, part name, meter size, and process data for a quote.
Contact Silver Automation Instruments for flow meter spare parts and new meter quotes. Send us your fluid type, pipe size in DN, pressure in bar, temperature in °C, and flow range. Tel: +86-135-1213-1526. WhatsApp: 86-135-12131526. WeChat: +86 13512131526.